4 Tips for A Frigidaire Dishwasher Not Draining Water

Your dishwasher handles a lot of tasks without which you may hate your kitchen. As with any other appliance in the home, the dishwasher isn’t without its fair share of problems. A puddle of water after a wash cycle is an indication that you have draining problems on your hands. However, a lot of factors can cause draining problems. Knowing the cause of the problem is instrumental to its repair. This is one more reason why you need to pay attention to your Frigidaire dishwasher when it isn’t draining and contact Quality Appliance Repair Calgary LTD

if you are unable to figure out things on your own. 

Frigidaire Draining Issues

Dishwasher users find water drainage to be a foreign concept despite the kitchen appliance water requirement for operation. Finding a mysterious puddle of water in your dishwasher is an indication of a problem. Getting to the bottom of the problem requires you to know the common causes of it. Below are some of the common culprits and how you can address the problem yourself.

Blocked Drain Hose

Similar to any other drain problem, a blocked hose may be responsible for the visible puddle in your dishwasher. The hose is often made from light plastic material and is designed to take wastewater out of your dishwasher. However, if it has accumulated grease or other solid matter, there is a huge chance that it won’t drain the proper way. To address this problem, you need to investigate the blockage and address it. In most cases, straightening out the kinks along the dishwasher hose can solve the problem. However, you need to be careful to avoid damaging the hose. A damaged hose cannot be repaired but replaced. If the dishwasher’s hose isn’t kinked, then there is a chance of an even bigger blockage within it. 

To address the problem, follow these steps.

• Disconnect your dishwasher from the power outlet.
• Locate your Frigidaire dishwasher manual and look for where the drain hose is located. In most cases, you’ll find the hose behind the lower front panel.
• Disconnect the drain hose from its pump
• Inspect the hose for clogs. If present, gently removes the clog by pushing it out or dismembering it. This can be done using a straightened wire, screwdriver, or any other suitable tool.
• If the clog is unreachable, you may need to disconnect the hose and replace it.

Clean the Dishwasher Filter

If the dishwasher still won’t drain, you may need to inspect the dishwasher filter. This part is installed to screen out food particles from entering into the drain hose or pump. When the filter itself is clogged, it may prevent the free flow of water through the dishwasher. Cleaning the filter is quite simple and it can restore balance and normal functionality to your dishwasher. 

To address this problem, follow these steps.

• Disconnect your dishwasher from the main power outlet.
• Remove the dishwasher’s bottom rack, press down on the wash arm, and rotate the filter handle counterclockwise.
• Pull up the spray arm and remove it with the filter.
• Separate the filter and rinse it thoroughly to remove debris.
• Reconnect the spray arm and filter to its compartment.
• Rotate the filter in a clockwise direction to lock it in place.

Dishwasher Drain Pump Issue

An impeller, facilitated by the Frigidaire dishwasher pump, is used to push water out of the dishwasher through the drain hose. Accumulated food particles can sometimes block the impeller. This may cause a draining issue with your dishwasher. To get to the bottom of this problem, you’ll need to consult your user manual to discover where the drain pump is and how to access it. Accessing the drain pump will facilitate blockage removal.

Another problem to watch out for is a failed drain pump motor. When this happens, the pump will be unable to expel water and can lead to drain issues. Call on your repair technician to take a look at this problem and perform a repair or replacement.

Air Gap and Garbage Disposal Problems

Air gaps and garbage disposal problems may also cause issues with your dishwasher. This problem is common with households that use a common drain for garbage disposal and dishwasher. Any blockage in the drain will affect the dishwasher and can lead to serious issues. You can address this problem by running the disposal before operating the dishwasher. You can also call on your appliance repair expert to have a look.